Kyosho Mini-Z 4X4 MX-01 Toyota 4Runner Metallic Red (KT531P)

Kyosho Mini-Z 4X4 MX-01 Toyota 4Runner Metallic Red (KT531P)

The combination of highly detailed bodywork and an all-new 4x4 chassis design opens up new levels of performance, far beyond anything RC enthusiasts have seen from a mini crawler.

In 2019, the world's most popular mini RC series, known as the Kyosho MINI-Z, celebrated more than 20 years of unmatched performance and scale realism in the hobby RC category. The continuous search for performance and evolution has led to the creation of a completely new 'MINI-Z 4x4' design that offers a totally new driving experience for RC hobbyists of all types, with a superior overall design, performance of driving and a high quality injection molded scale body construction. A significant feature of the MINI-Z 4x4 series is the increased emphasis on body detail and quality of finishes, which even surpass the existing benchmarks set by the MINI-Z. The body is also molded from a thicker material to better resist damage from crashes on rough terrain. The MINI-Z 4x4 incorporates the same ladder-style frame as real 4x4 vehicles, and features a three-link rigid axle suspension that combines what would normally be two upper arms into a single upper A-arm to offer maximum wheel movement. the suspension. A specially designed high-torque steering servo allows this machine to drive its elbows into rough terrain for excellent performance in the toughest rock-pull vehicle conditions. The high-torque 130 engine brings out the beast of the MINI-Z 4x4, especially geared to perform well in the low and medium speed ranges common in crawling.

Designed to balance exquisite style, scale details and superior driving performance, all the MINI-Z 4x4 needs are 8 AAA alkaline batteries (sold separately). Enjoy driving in any condition, from normal driving to rock crawling, while appreciating the stunning visuals. The Kyosho Mini-Z 4x4 is the only mini crawler that offers a full range of crawling features in a smaller package.

Technical data

- Length 200.5mm
- Width 87mm
- Height 86.0 mm
- MX-01 chassis type
- Wheel base 110mm
- F / R tread: 72.7mm
- Weight 223g (without battery)
- Class 130 motor / motor
- Gear ratio 55.44 ： 1 / 30.80 ： 1 / 46.20 ： 1
27.72 ： 1 / 39.60 ： 1 / 34.65 ： 1
- Front tire diameter Φ42.0mm
- Rear tire diameter: 42.0 mm
- Front tire width 14.3 mm
- Rear tire width 14.3 mm
- 4 x AAA alkaline battery
- Syncro KT-531P transmitter
- Speed Approximately 3.3km / h〜6.6km / h (10T〜 20T Pinion Gears)
- Operating time Approximately 60 minutes

Kit contents

- Complete chassis with built-in electronics.
- Factory painted body complete with many fine details.
- 2.4GHz KT-531P transmitter
- pinion gear set （10T 、 12T 、 14T 、 16T 、 18T 、 20T）
- 3 types of pinion gear spacers.

Needed for operation

- 4 x AAA batteries for the transmitter
- 4 x AAA batteries for the chassis （Alkaline or NiMH）